NCL White Cement Putty

NCL White Cement Putty

Smooth and durable finishes with NCL White Cement Putty

NCL White Cement Putty offers breathable walls and superior surface bonding. Its versatility shines as an ideal base coat for interior and exterior applications. Delivering durability, it transforms surfaces with a refined finish making it a top choice for your homes.

Breathable walls.

Excellent surface bonding.

Ideal base coat.

Interior & exterior application.

Unbeatable advantages, that set us apart!

NCL White Cement Putty

NCL Putty technical specifications

Here, you’ll find NCL White Cement Putty, a quick application leading to a sleek finish with strength, reliable adhesion, and controlled water resistance for enduring quality as your trusted solution for superior surfaces.

Cost-Efficient solution

Affordable choice without compromising on quality.

Environmentally friendly

Eco-conscious option with minimal environmental impact.

Swift application

Time-saving application process expedites project completion.

Sleek, smooth finish

Achieve elegance with a flawlessly smooth surface.

Strong compressive strength

Enduring strength stands up to various pressures.

Reliable pull-off strength

Assured adhesion for dependable surface attachment.

Controlled water absorption

Longevity ensured through regulated water absorption.

Resists moisture

Moisture resistance safeguards against potential damage.

Key facts and specifications

NCL White Cement Putty
  • Suitable for interior & exterior surfaces.
  • Suitable to apply on POP, Gypsum, Ceiling etc. with proper surface preparation.
40 Kg., and 20 Kg.
8 to 9 sft / kg in two coats application at average thickness of 1.5 mm. Coverage varies depending upon substrate condition & application practice.
Sl. No. Attributes Standard NCL Block Conforms
1 Colour Mfg. Spec White
2 Water Mixing Proportion Mfg. Spec 30 to 35%
3 Pot life at RT Mfg. Spec 60 minutes
4 Compressive strength EN-1015-11 > 7.5 Mpa
5 Tensile adhesion EN -1348 > 0.9 Mpa
6 Water absorption Mfg. Spec < 0.9 Mpa
7 Water resistant ASTM D 870 Pass
  • Ensure that the surface should be free from dust, oil, grease, paints, loose foreign particles /materials and curing agents which may affect adhesion.
  • Fill the cavities.
  • Wet the surface before application without leaving excess water.


Before mixing begins, wear hand gloves & goggles for protection. Take 7 litres of plain water in a tub and slowly add 20 kg. dry wall putty into the tub under slow speed electrical mixer or the same can be mixed manually with proper safety precautions. Leave the dough for 10 minutes and check the material consistence, if required add the remaining water, check the consistence and ease of blade movement then proceed for application. The mixed material should used within 150 minutes at RT.
  • At the time of application, the above dough should be free from lumps.
  • For better results, use one full bag for mixing.
  • For ease of application & to save time use quality bigger putty blade.
  • For better performance wet the surface.
1st Coat application:
  • Apply the above material with a putty blade from bottom to top to achieve a thickness of 2 to 4mm and leave it for 8 hours to dry when the temperature is above 35°C and if the temperature is below 35°C leave it for a minimum of 12 hours to dry.
2nd Coat application:
  • Apply the second coat horizontally after fulfilling the above condition point to get an overall thickness range from 4 to 8 mm. leave it for 72 hours to dry to achieve the minimum required properties.
  • Do not apply the 2nd Coat if you see wetness on the 1st Coat even after 12 hours drying time.
  • After 72 hours of drying time, apply Skim Coat NCL White Cement Putty 1127. After 72 hours carry out sanding with 320 and above grade emery paper to make the surface smooth & remove blade marks.
  • Curing time: Minimum 7 days are required to achieve the complete product’s properties in summer season (above 35°C) and 10 days are required for other seasons (below 35°C).
Shelf life
6 months
Store in a moisture-free dry place.
  • Keep out of reach of children.
  • Keep in a dry place.
  • Avoid inhalation of dust.
  • If it comes in contact with eyes or you feel skin irritation, wash with plenty of plain water and consult a doctor.

Get free consultation with our expert

One of the largest Aac block plant in South India with the highest manufacturing capacity