TILOSTIK

NCL – TILOSTIK

Technologically advanced, high-quality tile fixing

NCL Tilostik is a grey cement-based polymer modified, thin-bed adhesive for fixing of clay & ceramic tiles on leveled walls and floors. It is a high-quality factory pre-mixed dry powder with special chemical additives and inorganic fillers that provides good bonding strength. Tilostik is suitable for use on most masonry and concrete surfaces.

Premixed
material with Excellent
bonding.

Full bed coverage with Tile on Tile.

No
hollowness on Granite
floor.

Stunning interiors and exteriors.

Request for quote

Discover our range of high performance tile adhesives

Tile adhesives

Premixed material

Premixed, ready to use, consistent quality, reduces wastage.

Excellent bonding

Provides leveled tiled floor without air gaps. Eliminates hollow sound.

No hollowness

Prevents voids between the tile and floor base, thereby eliminating hollow sounds.

Full bed coverage

Covers the entire tile/stone surface while fixing. Ensuring complete adhesion.

Tile on tile

Eliminates the need for removal of old tiles, faster laying and even floor surface.

Granite floor

Ideal Adhesive for fixing granite/stone floors.

Tile adhesive specifications

Discover our adhesive tiles, designed to elevate your living spaces. Experience the perfect fusion of aesthetics and performance, with top-quality materials and expert craftsmanship. Explore comprehensive technical specifications for superior installation, enhancing your home’s beauty.

Simplified procurement

No need for individual raw materials.

Easy single pack system

Just add water as recommended.

Eliminates mixing variations

Assured quality with factory precision.

Versatile interior & exterior use

Suitable for cladding applications.

Effective self-curing adhesion

Bonds with excellent tensile strength.

Conforms to IS 15477 – type 2

Compliant with industry standards.

Time & labor saving

Efficient, reducing overall project duration.

Economical VOC-Free solution

Budget-friendly with no toxic fumes.

Key facts and specifications

TILOSTIK tile adhesive

Sl. No.	Attributes	Standard	NCL Block Conforms
1	Appearance	Mfg. Spec	Dry Powder
2	Color	Mfg. Spec	White
3	Packing	Mfg. Spec	20 kg.
4	Shelf life	Mfg. Spec	12 months
5	Mixing proportion with water	Mfg. Spec	25 to 30%
5	Mixing proportion with water	Mfg. Spec	25 to 30%
6	Pot life	Mfg. Spec	180 Minutes
7	Tools	Mfg. Spec	Notched Trowel& Rubber Trowel
8	Bed thickness	Mfg. Spec	min 3mm (Depends on tile size)
9	Open time at 25°c	Mfg. Spec	> 20 Minutes
10	Coverage	Mfg. Spec	> 3 sft. / kg. for 3mm
11	Time to traffic	Mfg. Spec	24 hours
12	Shear adhesion – 14 dry condition	> 8 KN / 10 KN	> 25 KN
13	Tensile strength — 14 dry condition	750 N / NA	> 1150 N

The backside of tiles is to be cleaned with wet cloth to remove all dust particles Before fixing it.Apply the mixed dough of adhesive on the substrate and spread it by notch trowel. Fix the tiles /stones and press firmly. Then tap properly with rubber hammer in order to spread the adhesive equally and for a good result. Remove any surplus adhesive on the face of the tiles. The tiles adjustment should be done within 15 minutes and before adhesive starts hardening.
The 3 mm spacing is recommended when fixing the tiles. After 24 hours, NCLs Cementitious Grouting can be done.

The surface should be dry, clean and free from dust, grease, oil and other contaminates. Keep the following tools ready – mixing tools, trowel, hammer, notched trowel, joint spacers, sponge etc. Cement based Surfaces: Screeds must be properly cured for 7 days. Cure the concrete for 3 weeks prior to tiling. The surface should be properly levelled for best outcome. Remove curing compounds and any other foreign matter before application which leads to de-bound the Tile Adhesive. Painted Surfaces: Already paint / lime etc. coated surface should be removed by wire brush or mechanically and loose peeling paint should be removed completely. Allow the surface to dry after cleaning.

Mixing

Mix the product with water in the ratio of approximately 1:4 in a clean tub. Take 75% of recommended water and gradually add Tilostik tile adhesive in it. Mixing can be done manually or by mechanical slow speed stirrer. Based on the material consistency adjust the water and mixing to be done, till homogenous lump free mix is obtained. After proper mixing, leave the paste for 5 minutes for polymeric dispersion before application. The paste should be kept away from direct sunlight, heat and use within 180 minutes of preparation (after mixing with water).

Keep out of reach of children.
Avoid inhalation of dust.
In case of contact with eyes, rinse eyes with plenty of water and consult a doctor immediately.

Would be provided as per requirement on demand.

Inquire now for a free consultation with our expert

+91 6300 532 129